How to buy PUMPONE with your Solflare wallet?

Q: How do I create a Solflare wallet?

You can create a Solflare wallet in minutes: On mobile: Download the Solflare app from the App Store or Google Play. Open the app and tap “Create Wallet.” On desktop: Install the Solflare browser extension for Chrome, Brave, or Firefox and follow the setup instructions. You’ll receive a seed phrase—make sure to write it down and store it securely. This is the only way to recover your wallet. For more info, check out our detailed guide: How to Set Up Your First Crypto Wallet with Solflare

Q: Where can I find the PUMPONE contract address?

The official Solana contract address for PUMPONE is: 14nEjw2kYmygbfGAyqxBfacNH7YX2rovqi43TXTKpump Always verify token addresses from trusted sources to avoid scams or fake tokens.

Q: What do I need before buying the token?

To buy PUMPONE , you’ll need: A Solflare Wallet Some SOL (or another SPL token ) in your wallet for swapping Fiat purchase is not available for this token; you can only swap using crypto. Make sure you have enough SOL for transaction fees (usually a fraction of a cent on Solana).

Q: Can I store PUMPONE safely in Solflare?

Yes. Once you buy or receive PUMPONE , it will automatically appear in your Solflare wallet under the token list. If not, you can add it manually using the token’s contract address. Solflare supports all standard SPL tokens on Solana.

Q: What if PUMPONE doesn’t show up after purchase?

Your PUMPONE should appear in your wallet automatically after purchase. If it doesn’t: Tap “Add new asset” in your Solflare wallet under “Tokens” Paste the PUMPONE contract address or name in the search bar Confirm and refresh your wallet view If the token still doesn’t show up, double-check the transaction status on Solscan and ensure you’ve used the correct network and wallet address.

Easiest ways to buy, swap, or transfer PUMP1 directly into your Solflare wallet—step by step.

Looking to buy PUMPONE? You can buy PUMP1 easily using the Solflare Wallet, whether you prefer to use crypto or pay with fiat, like a credit card or bank transfer. Follow these steps to buy PUMPONE using the Solflare mobile app or the browser extension.

PUMPONE Buying Guide: How to Buy PUMPONE with Crypto Using Solflare Mobile app

Buy PUMPONE (PUMP1) directly in the Solflare mobile app by swapping from SOL or other supported tokens. This guide walks you through each step, from funding your wallet to confirming your swap—no third-party DEX required.

Step 1

Set up or Open your Solflare Wallet

Download and open the Solflare mobile app on your device. Log in to your existing wallet, or create a new one directly in the app.

Don't have an account yet? See our beginner's guide to setting up a Solflare wallet.

Step 1

Set Up or Open Your Solflare Extension Wallet

Download and install the Solflare extension for your browser. Once installed, open the extension and log in to your wallet. If you're new to Solflare, click "I need a new wallet" to create one in minutes.

Need help? Follow our step-by-step Solflare wallet setup guide.

Step 2

Deposit SOL or another supported token

Transfer SOL or any supported SPL token into your Solflare wallet. You can send funds from a centralized exchange, another wallet, or even purchase SOL with fiat directly inside the Solflare app.

Need help? Read our detailed guide on transferring tokens to Solflare.

Step 2

Deposit SOL or another supported token

Transfer SOL (or another SPL token) to your Solflare wallet. You can send it from a centralized exchange or another wallet, or buy it with fiat directly in the Solflare app.

Step 3

Go to the Swap tab

Tap on the Swap tab inside your wallet. This feature lets you trade tokens directly—no need for a separate DEX.

Step 3

Go to the Swap tab

Navigate to the Swap section in your Solflare browser extension on the right side of your home screen (Portfolio tab) or click on the Trade tab from the menu on the left. Solflare's Swap feature lets you exchange tokens instantly—no need for third-party DEXs or leaving your wallet.

Step 4

Select PUMPONE

Choose PUMPONE (PUMP1) as the token you wish to purchase. Then, select the asset you want to swap from (for example, SOL or USDC) and enter the amount you want to buy.

Want to see what else you can buy? Explore all tokens available on Solflare.

Step 4

Select PUMPONE

Choose PUMPONE (PUMP1) as the token you want to buy. Then select the token you wish to swap from (like SOL or USDC), and enter the amount you'd like to exchange.

Want to see all available tokens? Browse the full list of tokens supported on Solflare.

Step 5

Confirm the swap

Hit "Swap", review the details, and then "Slide to approve". Your new PUMPONE tokens will appear in your wallet once the transaction is complete.

Need more help? See our full guide to swapping tokens with Solflare.

Step 5

Confirm the swap

Hit "Swap", review the details, and then "Confirm". Your new PUMPONE tokens will appear in your wallet once the transaction is complete.

Need more help? See our full guide to swapping tokens with Solflare.

Before buying PUMPONE PUMP1 double check potential risks

Mintable - Indicates if more tokens can be created after the initial launch.

Mintable

Mutable - Enables changes to the token’s metadata after creation.

Mutable

Yes

Freezable - Grants control to freeze token accounts and prevent transfers.

Freezable

Total holders

Last risk check date

4/11/2026, 12:04:53 AM

FAQ - How to Buy PUMPONE with Solflare Wallet

What is Solflare Wallet?

Solflare is a non-custodial wallet designed for the Solana blockchain. It lets you securely store, send, receive, stake, and swap Solana-based tokens—including SPL tokens like PUMPONE. Solflare is available as a mobile app, browser extension, and web wallet, making it a go-to choice for Solana users.

How do I create a Solflare wallet?

You can create a Solflare wallet in minutes:

On mobile: Download the Solflare app from the App Store or Google Play. Open the app and tap “Create Wallet.”

On desktop: Install the Solflare browser extension for Chrome, Brave, or Firefox and follow the setup instructions.

You’ll receive a seed phrase—make sure to write it down and store it securely. This is the only way to recover your wallet.

For more info, check out our detailed guide: How to Set Up Your First Crypto Wallet with Solflare

Where can I find the PUMPONE contract address?

What do I need before buying the token?

Can I store PUMPONE safely in Solflare?

What network does Solflare support?

What if PUMPONE doesn’t show up after purchase?

Are there any risks or fees when buying tokens on Solflare?

Swapping tokens in Solflare includes a small network fee (paid in SOL) and a DEX trading fee, both typically very low. If using fiat, fees are determined by the payment provider (e.g., MoonPay or Stripe) and may vary by region and payment method.

Always verify token details and amounts before confirming a swap or fiat purchase to stay safe.
Learn more about your Solflare wallet security: How Solflare protects your assets

What is Solflare Wallet?

How do I create a Solflare wallet?

Where can I find the PUMPONE contract address?

The official Solana contract address for PUMPONE is:
14nEjw2kYmygbfGAyqxBfacNH7YX2rovqi43TXTKpump
Always verify token addresses from trusted sources to avoid scams or fake tokens.

What do I need before buying the token?

To buy PUMPONE, you’ll need:

A Solflare Wallet
Some SOL (or another SPL token) in your wallet for swapping
Fiat purchase is not available for this token; you can only swap using crypto.

Make sure you have enough SOL for transaction fees (usually a fraction of a cent on Solana).

Can I store PUMPONE safely in Solflare?

Yes. Once you buy or receive PUMPONE, it will automatically appear in your Solflare wallet under the token list. If not, you can add it manually using the token’s contract address. Solflare supports all standard SPL tokens on Solana.

What network does Solflare support?

Solflare is built exclusively for the Solana network. It does not support Ethereum (ERC-20), BNB Smart Chain (BEP-20), or other blockchains. Only send Solana-native tokens (SPL tokens) to your Solflare wallet address.

What if PUMPONE doesn’t show up after purchase?

Your PUMPONE should appear in your wallet automatically after purchase. If it doesn’t:

Tap “Add new asset” in your Solflare wallet under “Tokens”
Paste the PUMPONE contract address or name in the search bar
Confirm and refresh your wallet view

If the token still doesn’t show up, double-check the transaction status on Solscan and ensure you’ve used the correct network and wallet address.